Hw 130 Motor Control Shield For Arduino Datasheet -

Unlike its more powerful successor (e.g., L298N-based shields), the HW-130 focuses on low-voltage, low-current applications where simplicity and direct Arduino pin mapping are paramount.

void setup() stepper.setSpeed(30); // 30 rpm hw 130 motor control shield for arduino datasheet

void setup() motor1.setSpeed(150); // 0-255 motor2.setSpeed(200); motor1.run(FORWARD); motor2.run(BACKWARD); Unlike its more powerful successor (e

![HW-130 Shield Pictorial Representation] | Parameter | Value / Range | |-------------------------|---------------------------------------| | Driver IC | L293D (x1) | | Input Voltage (VCC) | 4.5V to 12V DC (external power) | | Logic Voltage | 5V (from Arduino) | | Max Continuous Current | 600 mA per channel (peak: 1.2A) | | Number of DC Motors | Up to 4 (or 2 with speed/direction) | | Stepper Motors | 1 bipolar (unipolar not supported) | | PWM Channels | 4 (pins 5, 6, 9, 10 on Arduino) | | Thermal Shutdown | Yes (built into L293D) | | Flyback Diodes | Integrated in L293D (internal) | | PCB Size | 68.5mm x 53.3mm (standard Uno shield) | | Stackable | Yes (with pin headers) | Unlike its more powerful successor (e.g.

void loop() stepper.step(100, FORWARD, SINGLE); delay(1000); stepper.step(100, BACKWARD, DOUBLE); delay(1000);