C2800nm Adventerprisek9 Mz 152 1 Full -

| Feature | Throughput (without encryption) | With AES-256 (DMVPN) | | :--- | :--- | :--- | | Fast Ethernet (FE) | 98 Mbps | 45 Mbps | | Gigabit (via HWIC) | 190 Mbps (max bus limit) | 40 Mbps | | BGP table (full internet) | Unstable (CPU 99%) | Not recommended | | OSPF (100 routes) | < 15% CPU | 25% CPU |

Router# copy tftp: flash: Address or name of remote host [255.255.255.255]? 192.168.1.100 Source filename? c2800nm-adventerprisek9-mz.152-1.full Destination filename? [c2800nm-adventerprisek9-mz.152-1.full] Accessing tftp://192.168.1.100/c2800nm-adventerprisek9... [OK] Router# configure terminal Router(config)# no boot system Router(config)# boot system flash:c2800nm-adventerprisek9-mz.152-1.full Router(config)# config-register 0x2102 (boots into IOS; 0x2101 for ROMmon) Router(config)# end Step 5: Save and Reload Router# write memory Router# reload Do not interrupt the power during reload. The first boot will take 3-5 minutes as the image decompresses. Part 5: Common Pitfalls and Troubleshooting Even experienced engineers encounter problems with this specific image. Problem A: "Processor memory (RAM) 256 MB, insufficient for 15.x" Solution: The router will cycle with error: *** System received a Software forced crash *** . You cannot bypass this. Source a DRAM upgrade (e.g., Cisco MEM2851-512U512). Problem B: Feature License Missing After booting adventerprisek9 , you might see: %LICENSE-3-NO_LICENSE_FOUND: No feature license found for feature ipseck9... c2800nm adventerprisek9 mz 152 1 full

Check Cisco’s official download page for the latest hash. | Feature | Throughput (without encryption) | With