23km-c051-09v Datasheet May 2026

| Parameter | Value | | :--- | :--- | | Frame Size | 56.4 mm x 56.4 mm | | Motor Body Length | 76 mm (excluding shaft) | | Shaft Diameter | 6.35 mm (0.25 in) | | Shaft Length | 21 mm | | Shaft Type | Single-ended, with flat | | Mounting Holes | 4 x M4 through-holes, 47.14 mm square pitch | | Concentricity | 0.075 mm max | | Radial Play | 0.02 mm max (at 5N load) | | Axial Play | 0.08 mm max (at 10N load) | The front faceplate has four M4 threaded holes (or clearance holes, depending on the version) arranged in a 47.14 x 47.14 mm square. The pilot diameter (centering boss) is 38.10 mm. Ensure your mounting bracket has a matching recess to prevent misalignment. The rear end cap typically includes a 6-pin Molex-style connector (JST PH or similar) for the coil wires.

The "09V" variant is often shorter than standard NEMA 23 motors. A standard 23KM motor may be 56mm or 76mm long; the -09V is the 76mm long stack, providing higher torque than the 56mm version. 3. Electrical Characteristics & Wiring This is the most critical section of the 23KM-C051-09V datasheet. Incorrect wiring can lead to erratic motion or permanent damage. Coil Configuration The motor has two phases (A and B). Each phase has a center tap (not used in bipolar mode). As a 4-wire bipolar motor, the center taps are not brought out. 23km-c051-09v datasheet

Last updated: October 2024. Specifications subject to change without notice. Always verify with the supplier’s latest revision. | Parameter | Value | | :--- | :--- | | Frame Size | 56